G Series Double Inlet Belt Drive Blowers

SKU#:

G SERIES

  • Sleeve or ball bearing models available.
  • Base feet can be mounted for various discharge positions.
  • Motor mounting hardware included with each blower.
  • Corrosion resistant G90 galvanized steel blower housing.
  • Capacity range 200 to 8000 CFM.
  • The blower wheel has an exclusive centre disc which allows blowers to be used safely at speeds well above any normal requirement.
  • Blower housings have extruded holes to give greater holding power for mounting base sides and motor bracket.
  • Matte finish zinc coated wheel and cut-off baffle.
  • Shaft dimensions and finish are carefully controlled to ensure quiet, trouble free operation.
  • Available with permanently lubricated sleeve bearings suitable for operation in ambient temperatures of +30 to +120 deg. F and under 1000 RPM OR Ball bearings with a sealed lifetime supply of lubricant for operation in ambient temperatures of -65 to +250 deg. F (optional).
  • Shafts for ball bearing models have keywayed ends. Sleeve bearing model shafts have flats.
  • Twin units available.  Please call for details.
TYPICAL MAXIMUM CFM @ SP 
MODEL1/2” SP1” SP1 1/2" SP2" SP2 1/2" SP 
G7-511001000950875825 
G726102525245023252250 
G9-732203100302029002800 
G944504350425041004000 
G10-837803640350033503180 
G1055005200500047004500 
G12-950004700445041003800 
G1265006300600057005500 
G15-1071006900670064006100 
G1597509250900085008250 
G18-131050010000950091508500 
G18125001200011250102509500 
       
CFM values listed are summarized for convenience only.
GSeries_DimesnionDwg.jpg           
MODELABCDEHLSHAFT
DIAMETER
WHEEL
DIAMETER
WHEEL
WIDTH
UNIT WEIGHT (lbs)
without motor & drives
G7-514 5/16" 12 5/16"12 11/16"8 1/4"6 7/8"7 7/8"9 5/8"3/4"8 1/16"4 15/16"13
G714 5/16" 12 5/16"12 11/16"8 1/4"9 3/16"10 3/16"9 5/8"3/4"8 1/16"7 3/16"15
G9-716 15/16" 15 1/16" 15 9/16" 10 1/4"9 3/16"10 3/16"11 3/4"3/4"10 1/4"7 3/16"19
G916 15/16" 15 1/16" 15 9/16" 10 1/4"11 13/16"12 13/16"11 3/4"3/4"10 1/4"9 9/16"21
G10-819"16 3/4" 17 3/8" 11 3/8"10 1/2"11 1/2"13 3/8"3/4"11 1/8"8 1/16"23
G1019"16 3/4" 17 3/8" 11 3/8"13 1/8"14 1/8"13 3/8" 3/4"11 9/16"10 13/16"25
G12-922 1/8" 19 1/2" 20 5/8" 13 7/16"12 1/4"13 1/4"16 1/8" 3/4"12 7/8"9 9/16"29
G1222 1/8"19 1/2" 20 5/8" 13 7/16"15 5/8"16 5/8"16 1/8" 3/4" or 1" 12 7/8"12 13/16"34
G15-1025 3/4" 22 11/16" 24 1/4" 15 7/8" 14 11/16"15 11/16"19 1/2" 1"15 1/2" 10 13/16"48
G1525 3/4" 22 11/16" 241/4"15 7/8" 18 5/8"19 5/8" 19 1/2" 1"15 1/2" 15 1/16"56
G18-1330 1/2" 27"29"18 7/8" 17 3/8"18 3/8" 24"1"18 1/2" 15 1/16"67
G1830 1/2" 27"29"18 7/8" 21 7/8"22 7/8" 24"1"18 1/2" 18 1/2"87

* May not be exactly as shown. Blower assembly may be oriented differently

Replacement Parts

Click your model number below for replacement parts.