More Views

Plastic Penning Systems

  • SKU:
  • Plastic Penning Systems

Quick Overview

Plastic Penning Systems

Details

  • No glue needed and will not come apart - no external support required.
  • Made of extruded, rigid PVC.
  • Durable - will not rust or rot.
  • Sanitary - will not harbour bacteria.
  • Smooth edges makes for a very animal friendly design.
  • Easy to install and easily cut to any required size.
  • Use for pen partitions, walls and doors.
  • Very versatile. Suitable for new construction or existing structure renovations.
  • Makes a room very bright and clean.
  • No external support required.
  • Plank is 2” x 10”. Available in 18’, 20’ and 24’ lengths.

EASY TO INSTALL

A simple top cap finishes off the top of your panels and prevents dirt accumulation.

Specially designed bottom plugs prevent dirt build-up on the bottom of your planking.

Locking System

Ordering Guidelines

  1. Order panels - can be ordered as kits, specify height & stationary or swing.
  • 31” weaner height.
  • 41” finisher height OR
  • Can be ordered as parts.
  • Bundles of plastic plank, 3 planks per 31” panel, 4 planks per 41” panel.

IF ORDERING AS PARTS, THE FOLLOWING IS REQUIRED:

  1. Order channels.
  • Wall channels at walls.
  • Swing channels for swing panels (2 per panel).
  • Channels + plate, use these at ends of panels where swing panels meet.
  • Feeder channels, to be used at feeder (31” panels only).
  1. Order quick latch packages.
  • One for each fixed panel end where swinging panels meet.
  • Galvanized latches to be used for the 41” series of panels.
  1. Order flipper latches.
  • One for each swinging panel at a wall.
  1. Order swing hook packages.
  • One package for each swinging panel, use the PVC swing hook package.
  1. Order leg packages.
  • As required at ends of panels.
  1. Order stiffener posts.
  • Required where stationary panel in longer than 10’ (31” series), 8’ (41” series).
  1. Order anchors.
  • Anchor bolts or T-bolts for legs.
  • As required for fixed panels at walls.
  • As required for flipper latches (2 per latch).
  1. Order bolts & nuts.
  • 1/4” X 2 1/2” – 3 per channel for 31” series panels.
  • 1/4” X 2 1/2” – 4 per channel for 41” series panels.