- No glue needed and will not come apart - no external support required.
- Made of extruded, rigid PVC.
- Durable - will not rust or rot.
- Sanitary - will not harbour bacteria.
- Smooth edges makes for a very animal friendly design.
- Easy to install and easily cut to any required size.
- Use for pen partitions, walls and doors.
- Very versatile. Suitable for new construction or existing structure renovations.
- Makes a room very bright and clean.
- No external support required.
- Plank is 2” x 10”. Available in 18’, 20’ and 24’ lengths.
EASY TO INSTALL
A simple top cap finishes off the top of your panels and prevents dirt accumulation.
Specially designed bottom plugs prevent dirt build-up on the bottom of your planking.
- Order panels - can be ordered as kits, specify height & stationary or swing.
- 31” weaner height.
- 41” finisher height OR
- Can be ordered as parts.
- Bundles of plastic plank, 3 planks per 31” panel, 4 planks per 41” panel.
IF ORDERING AS PARTS, THE FOLLOWING IS REQUIRED:
- Order channels.
- Wall channels at walls.
- Swing channels for swing panels (2 per panel).
- Channels + plate, use these at ends of panels where swing panels meet.
- Feeder channels, to be used at feeder (31” panels only).
- Order quick latch packages.
- One for each fixed panel end where swinging panels meet.
- Galvanized latches to be used for the 41” series of panels.
- Order flipper latches.
- One for each swinging panel at a wall.
- Order swing hook packages.
- One package for each swinging panel, use the PVC swing hook package.
- Order leg packages.
- As required at ends of panels.
- Order stiffener posts.
- Required where stationary panel in longer than 10’ (31” series), 8’ (41” series).
- Order anchors.
- Anchor bolts or T-bolts for legs.
- As required for fixed panels at walls.
- As required for flipper latches (2 per latch).
- Order bolts & nuts.
- 1/4” X 2 1/2” – 3 per channel for 31” series panels.
- 1/4” X 2 1/2” – 4 per channel for 41” series panels.