• NEW

More Views

Penta-Lite Economic HVLS Fans

  • SKU:
  • PENTA-LITE ECONOMIC HVLS

Quick Overview

Penta-Lite Economic HVLS Fans

Details

Operating on a 1.0 HP gear motor, minimal power consumption is combined with impressive air volumes to create the highly efficient Penta-Lite 5L economic geared drive HVLS fan.

Penta-Lite HVLS fans blanket a very large area by constantly moving air to create an expansive comfort zone. As a result, the big ceiling fan can createan evaporative cooling effect of three to four degrees throughout the facility.

During the heating season, the Penta-Lite HVLS fan technology can destratify uneven temperatures that can be in excess of fifteen degrees from ceiling to floor. This results in significant energy savings since the heating system cycles less frequently.

Features

  • Equipped with five high performance STOL design airfoils constucted of E420 non-anodized aluminium. Contoured for maximum air movement.
  • Factory programmed Variable Frequency Drive (VFD) in remote mounted enclosure. Includes disconnect switch and fuse protection.
  • 1/4” powder-coated steel and anodized aluminum chassis resists rusting and corrosion even in cold and damp environments.
  • Open Drip Proof (ODP) motor with precision finished gearbox for low noise and long service life. Sealed with lifetime synthetic oil. Robust 3-inch output shaft for strength with nylon bushing on input.
  • Quiet Performance & Minimal Maintenance
  • Conforms to CSA Standard 22.2# 133 and UL 507

How It Works

The S.T.O.L. Advantage

Penta-Lite airfoils are engineered with S.T.O.L. (Short Take Off & Landing) Technology to obtain the greatest amount of lift at slower speeds. The more lift the airfoil can generate, the greater amount of air which can be displaced towards the floor.

Due to an increase of lift created by the airfoil, Penta-Lite fans can operate at lower speeds with less power consumption and produce a higher distribution of airflow than other styles of airfoils.

Accessories

HVLS Fan Controls

Dimensions

    
MODEL NUMBERAB*** 
5L10-V*-P**10’44” 
5L12-V*-P**12’44” 
5L14-V*-P**14’44” 
5L16-V*-P**16’44” 
5L18-V*-P**18’49” 
5L20-V*-P**20’51” 
5L24-V*-P**24’55” 
* Replace V with Input Voltage 115, 230, 460 or 575.
**Replace P with the Phase 1 for Single or 3 for
   Three Phase. IE: 5L08-230-3.
 
***Based on standard 1' extension bar 

Specifications

          
MODEL NUMBERDIAMETERNOMINAL MOTORVOLTSMAX RPMFLAAREA OF INFLUENCENOISE LEVELWEIGHT*** 
5L10-V*-P**10 Ft.0.75 kW (1.0 HP) - 48/62hz99-660851.96-3.38100 Ft.45 dBA236 lbs. 
5L12-V*-P**12 Ft.0.75 kW (1.0 HP) - 48/62hz99-660851.96-3.38120 Ft.45 dBA246 lbs. 
5L14-V*-P**14 Ft.0.75 kW (1.0 HP) - 48/62hz99-660751.96-3.38140 Ft.45 dBA256 lbs. 
5L16-V*-P**16 Ft.0.75 kW (1.0 HP) - 48/62hz99-660641.96-3.38160 Ft.45 dBA266 lbs. 
5L18-V*-P**18 Ft.0.75 kW (1.0 HP) - 48/62hz99-660551.96-3.38180 Ft.45 dBA277 lbs. 
5L20-V*-P**20 Ft.0.75 kW (1.0 HP) - 48/62hz99-660531.96-3.38200 Ft.45 dBA287 lbs. 
5L24-V*-P**24 Ft.0.75 kW (1.0 HP) - 48/62hz99-660421.96-3.38240 Ft.45 dBA307 lbs. 
* Replace V with Input Voltage 115, 230, 460 or 575. **Replace P with the Phase 1 for Single or 3 for Three Phase. IE: 5L10-230-3.  
***Based on standard 1' extension bar