DSQ-B Belt Drive Square Inline Blowers

Available in 10” to 27” sizes.
Heavy duty, non-overloading backward inclined wheel.
Pivoted motor mounting base for convenient belt tension adjustment.
Air handler pillow block bearings mounted on rigid angle iron frame.
Leak proof access panels with gasket.
Angle iron mounting lugs can be relocated for base or suspension mounting or positioning motor on the top, side or bottom of blower.
Motor cover supplied.
Junction box.

View table fullscreen

TYPICAL MAXIMUM CFM @ SP
MODEL	1/2” SP				1” SP				1 1/2” SP				2 SP				Min HP	Max HP
MODEL	CFM	BHP	FEI	FEPact (kw)	CFM	BHP	FEI	FEPact (kw)	CFM	BHP	FEI	FEPact (kw)	CFM	BHP	FEI	FEPact (kw)	Min HP	Max HP
DSQ-B-10	1700	0.87	0.58	0.87	1500	0.96	0.68	0.95	1300	0.96	0.78	0.95	1100	1	0.81	0.98	1/4	1
DSQ-B-12	2700	1.33	0.57	1.27	2400	1.31	0.74	1.25	2100	1.29	0.87	1.23	1900	1.4	0.91	1.33	1/4	1 1/2
DSQ-B-13	3100	1.4	0.61	1.33	2800	1.47	0.76	1.39	2400	1.42	0.88	1.35	2000	1.44	0.92	1.37	1/3	1 1/2
DSQ-B-15	4000	1.93	0.56	1.79	3600	1.96	0.72	1.81	3200	1.99	0.83	1.84	2600	1.88	0.89	1.74	1/3	2
DSQ-B-16	5400	2.55	0.57	2.31	5000	2.68	0.73	2.43	4600	2.8	0.84	2.53	4000	2.71	0.93	2.45	1/3	3
DSQ-B-18	6000	2.46	0.64	2.24	5600	2.74	0.78	2.48	5000	2.75	0.91	2.48	4400	2.76	0.99	2.49	1/2	3
DSQ-B-20	7200	2.94	0.63	2.65	6400	2.97	0.81	2.67	5600	2.99	0.92	2.69	4600	2.9	0.98	2.61	1/2	3
DSQ-B-22	9500	4.22	0.59	3.72	9000	4.6	0.74	4.04	8300	4.8	0.86	4.21	7500	4.89	0.94	4.28	3/4	5
DSQ-B-24	12500	6.32	0.52	5.48	12000	6.9	0.66	5.96	11200	7.12	0.78	6.14	10500	7.48	0.87	6.44	1	7 1/2
DSQ-B-27	14500	6.81	0.55	5.88	13500	7.06	0.72	6.09	12500	7.36	0.83	6.34	11000	7.16	0.93	6.17	1	7 1/2
Power rating (BHP) does not include transmission losses. Performance certified is for installation type B: Free inlet, Ducted outlet. Performance ratings do not include the effect of appurtenances (accessories).


DSQ-B BELT DRIVE BACKWARD INCLINED SQUARE INLINE BLOWER
MODEL	L* X W X H	INLET/OUTLET	MOUNTING BRACKET HOLES		MOTOR ENCLOSURE		WEIGHT (lbs) without motor
MODEL	A	B	A1	B1	D	E	WEIGHT (lbs) without motor
DSQ-B-10	20 1/16"L X 16 1/16"W X 16 1/16"H	14"	20 9/13"L X 18 9/16"W X 18 9/16"H	19"L X 15"W X 15"H	15 1/4"	34 5/16"	62
*NOTE: With the exception of DSQ-B-10, all models are cubes (DSQ-B-10 has extended length)
DSQ-B-12	20 1/16"	17"	22 9/16"	18 3/4"	15 1/4"	35 5/16	73
DSQ-B-13	22 1/16"	18 3/4"	24 9/16"	20 3/4"	15 1/4"	37 5/16	85
DSQ-B-15	24 9/16"	20 7/8"	27"	23"	15 1/4"	39 13/16	95
DSQ-B-16	26 1/16"	23"	28 9/16"	24 3/4"	16 3/4"	42 13/16	123
DSQ-B-18	28 11/16"	25 3/8"	31 3/16"	27 1/8"	16 3/4"	45 7/16	140
DSQ-B-20	31 7/16"	27 3/4"	33 7/8"	29 7/8"	16 3/4"	48 3/16	165
DSQ-B-22	34 1/16"	31"	36 9/16"	32 3/4"	21 3/4"	55 13/16	211
DSQ-B-24	37 9/16"	34"	40"	36"	21 3/4"	59 5/16	241
DSQ-B-27	41 3/8"	37 1/2"	43 13/16"	39 5/16"	21 3/4"	63 1/8	280

F-DSQ FILTER SECTION
MODEL	X	Y	Z	FILTER FACTOR	UNIT WEIGHT(LBS)
MODEL	X	Y	Z	FILTER FACTOR	UNIT WEIGHT(LBS)
F-DSQ-10	20 1/16"L X 16 1/16"W X 16 1/16"H	14"	6"	7.085	10
F-DSQ-12	20 1/16"	17"	6"	3.069	13
F-DSQ-13	22 1/16"	18 3/4"	6"	2.184	15
F-DSQ-15	24 9/16"	20 7/8"	14"	0.762	26
F-DSQ-16	26 1/16"	23"	14"	0.630	27
F-DSQ-18	28 11/16"	25 3/8"	14"	0.463	30
F-DSQ-20	31 7/16"	27 3/4"	14"	0.346	33
F-DSQ-22	34 1/16"	31"	20"	0.182	57
F-DSQ-24	37 9/16"	34"	20"	0.134	64
F-DSQ-27	41 3/8"	37 1/2"	20"	0.100	71

Suspension or base mount vibration isolators.
F-DSQ Filter section with ‘V’ bank 1" aluminum filters. (Filter rack will accept customer supplied 2" filters).