800 Series DWDI Blowers with Frame

  • Features frame with spider bearing bracket mounts.
  • Available sizes: 9”, 10”, 12”, 15” and 18” wheel diameters.
  • Keywayed shaft both ends.
  • Universal Frame allows for choice of discharge position.
  • Motor mounting hardware supplied.
  • Ball bearings are permanently lubricated.
  • Corrosion resistant galvanized blower housing.
  • Available as single or twin assemblies.
  • Matte finish zinc coated steel Delhi 'G' series full width wheel and cut-off baffle.
  • Frame has green baked enamel finish.
  • Insert ball bearings with resilient rings.
  • Bearing brackets are attached with thread cutting screws driven into extruded housing holes (809) or attached with a bolt and locknut (810 through 818).
  • Motor mounting bracket is attached to the blower frames on models 809 through 815 and is rated at 3 HP.
  • Motor mounting bracket/motor plate assembly for 818 and 818-2 models is rated at 5 HP.
  • Motor mounting and adjusting hardware is packed with each unit.  Two adjusting leg sets are furnished with 815 and 818 models,one only with all others.
  • Units individually cartoned or skidded for shipment.

Contact US

MAXIMUM CFM @ SP
MODEL 1/2” SP 1” SP 1 1/2” SP 2" SP 2 1/2" SP
809 5100 5000 4900 4800 4700
810 6900 6800 6600 6400 6200
812 8200 8000 7800 7600 7400
815 12000 11500 11250 11000 10500
818 18000 17000 16500 16000 15500
CFM values are listed above are summarized for convenience only. 

360 Viewer